NCERT Class 12 Physics Chapter 1 Electric Charges And Fields
Summary:
Questions And Answers: NCERT Class 12 Physics Chapter 1 Electric Charges And Fields
Question1.1
What is the force between two small charged spheres having charges of 2 × 10−7 C and 3 × 10−7 C placed 30 cm apart in air?
Answer:
Repulsive force of magnitude 6 × 10−3 N
Charge on the first sphere, q1 = 2 × 10−7 C
Charge on the second sphere, q2 = 3 × 10−7 C
Distance between the spheres, r = 30 cm = 0.3 m
Electrostatic force between the spheres is given by the relation
Question1.2
The electrostatic force on a small sphere of charge 0.4 μC due to another small sphere of charge − 0.8 μC in air is 0.2 N. (a) What is the distance between the two spheres? (b) What is the force on the second sphere due to the first?
Answer:
(a) Electrostatic force on the first sphere, F = 0.2 N
Charge on this sphere, q1 = 0.4 μC = 0.4 × 10−6 C
Charge on the second sphere, q2 = − 0.8 μC = − 0.8 × 10−6 C
Electrostatic force between the spheres is given by the relation,
The distance between the two spheres is 0.12 m.
(b) Both the spheres attract each other with the same force. Therefore, the force on the second sphere due to the first is 0.2 N
Question1.3
Check that the ratio ke2/G memp is dimensionless. Look up a Table of Physical Constants and determine the value of this ratio. What does the ratio signify?
Answer:
The given ratio is ke2/G memp where G = Gravitational constant. Its unit is N m2 kg−2.
me and mp = Masses of electron and proton. Their unit is kg.
e = Electric charge. Its unit is C.
This is the ratio of electric force to the gravitational force between a proton and an electron, keeping distance between them constant.
Question1.4
(a) Explain the meaning of the statement ‘electric charge of a body is quantised’.
(b) Why can one ignore quantisation of electric charge when dealing with macroscopic i.e., large scale charges?
Answer:
(a) Electric charge of a body is quantized. This means that only integral (1, 2, …., n) number of electrons can be transferred from one body to the other. Charges are not transferred in fraction. Hence, a body possesses total charge only in integral multiples of electric charge.
(b) In macroscopic or large scale charges, the charges used are huge as compared to the magnitude of electric charge. Hence, quantization of electric charge is of no use on macroscopic scale. Therefore, it is ignored and it is considered that electric charge is continuous.
Question1.5
When a glass rod is rubbed with a silk cloth, charges appear on both. A similar phenomenon is observed with many other pairs of bodies. Explain how this observation is consistent with the law of conservation of charge.
Answer:
Rubbing produces charges of equal magnitude but of opposite nature on the two bodies because charges are created in pairs. This phenomenon of charging is called charging by friction. The net charge on the system of two rubbed bodies is zero. This is because equal amount of opposite charges annihilate each other. When a glass rod is rubbed with a silk cloth, opposite natured charges appear on both the bodies. This phenomenon is in consistence with the law of conservation of energy. A similar phenomenon is observed with many other pairs of bodies.
Question1.6
Four point charges qA = 2 μC, qB = −5 μC, qC = 2 μC, and qD = −5 μC are located at the corners of a square ABCD of side 10 cm. What is the force on a charge of 1 μC placed at the centre of the square?
Answer:
The given figure shows a square of side 10 cm with four charges placed at its corners. O is the centre of the square.
Where,
(Sides) AB = BC = CD = AD = 10 cm
(Diagonals) AC = BD = 10√2 cm
AO = OC = DO = OB = (10√2)/2 cm 5√2cm
A charge of amount 1μC is placed at point O.
Force of repulsion between charges placed at corner A and centre O is equal in magnitude but opposite in direction relative to the force of repulsion between the charges placed at corner C and centre O. Hence, they will cancel each other.
Similarly, force of attraction between charges placed at corner B and centre O is equal in magnitude but opposite in direction relative to the force of attraction between the charges placed at corner D and centre O. Hence, they will also cancel each other. Therefore, net force caused by the four charges placed at the corner of the square on 1 μC charge at centre O is zero.
Question1.7
(a) An electrostatic field line is a continuous curve. That is, a field line cannot have sudden breaks. Why not?
(b) Explain why two field lines never cross each other at any point?
Answer:
(a) An electrostatic field line is a continuous curve because a charge experiences a continuous force when traced in an electrostatic field. The field line cannot have sudden breaks because the charge moves continuously and does not jump from one point to the other.
(b) If two field lines cross each other at a point, then electric field intensity will show two directions at that point. This is not possible. Hence, two field lines never cross each other.
Question1.8
Two point charges qA = 3 μC and qB = −3 μC are located 20 cm apart in vacuum.
(a) What is the electric field at the midpoint O of the line AB joining the two charges?
(b) If a negative test charge of magnitude 1.5 × 10−9 C is placed at this point, what is the force experienced by the test charge?
Answer:
(a) The situation is represented in the given figure. O is the mid-point of line AB.
= 5.4 × 106 N/C along OB
Therefore, the electric field at mid-point O is 5.4 × 106 N C−1 along OB.(b) A te
st charge of amount 1.5 × 10−9 C is placed at mid-point O.
q = 1.5 × 10−9 C
Force experienced by the test charge = F
∴ F = qE
= 1.5 × 10−9 × 5.4 × 106
= 8.1 × 10−3 N
The force is directed along line OA. This is because the negative test charge is repelled by the charge placed at point B but attracted towards point A.
Therefore, the force experienced by the test charge is 8.1 × 10−3 N along OA.
Question1.9
A system has two charges qA = 2.5 × 10−7 C and qB = −2.5 × 10−7 C located at points A: (0, 0, − 15 cm) and B: (0, 0, + 15 cm), respectively. What are the total charge and electric dipole moment of the system?
Answer:
Both the charges can be located in a coordinate frame of reference as shown in the given figure.
At A, amount of charge, qA = 2.5 × 10−7C
At B, amount of charge, qB = −2.5 × 10−7 C
Total charge of the system,
q = qA + qB
= 2.5 × 10−7 C − 2.5 × 10−7 C
= 0
Distance between two charges at points A and B,
d = 15 + 15 = 30 cm = 0.3 m
Electric dipole moment of the system is given by,
p = qA × d = qB × d
= 2.5 × 10−7 × 0.3
= 7.5 × 10−8 C m along positive z-axis
Therefore, the electric dipole moment of the system is 7.5 × 10−8 C m along positive z−axis.
Question1.10
An electric dipole with dipole moment 4 × 10−9 C m is aligned at 30° with the direction of a uniform electric field of magnitude 5 × 104 N C−1. Calculate the magnitude of the torque acting on the dipole.
Answer :
Electric dipole moment, p = 4 × 10−9 C m
Angle made by p with a uniform electric field, θ = 30°
Electric field, E = 5 × 104 N C−1
Torque acting on the dipole is given by the relation,
τ = pE sinθ
= 4 x 10-9 cm x 5 x 104 NC-1 x (0.5)
= 104 Nm
Question1.11
A polythene piece rubbed with wool is found to have a negative charge of 3 × 10−7 C.
(a) Estimate the number of electrons transferred (from which to which?)
(b) Is there a transfer of mass from wool to polythene?
Answer:
(a) When polythene is rubbed against wool, a number of electrons get transferred from wool to polythene. Hence, wool becomes positively charged and polythene becomes negatively charged.
Amount of charge on the polythene piece, q = −3 × 10−7 C
Amount of charge on an electron, e = −1.6 × 10−19 C
Number of electrons transferred from wool to polythene = n
n can be calculated using the relation,
q = ne
n = q/e
n = -3 x 107 C / -1.6 x 10-19 C
= 1.87 × 1012
Therefore, the number of electrons transferred from wool to polythene is 1.87 × 1012.
(b) Yes.
There is a transfer of mass taking place. This is because an electron has mass,
me = 9.1 × 10−3 kg
Total mass transferred to polythene from wool,
m = me × n
= 9.1 × 10−31 × 1.85 × 1012
= 1.706 × 10−18 kg
Hence, a negligible amount of mass is transferred from wool to polythene.
Question1.12
(a) Two insulated charged copper spheres A and B have their centers separated by a distance of 50 cm. What is the mutual force of electrostatic repulsion if the charge on each is 6.5 × 10−7 C? The radii of A and B are negligible compared to the distance of separation.
(b) What is the force of repulsion if each sphere is charged double the above amount, and the distance between them is halved?
Answer:
(a) Charge on sphere A, qA = Charge on sphere B, qB = 6.5 × 10−7 C
Distance between the spheres, r = 50 cm = 0.5 m
= 1.52 × 10−2 N
Therefore, the force between the two spheres is 1.52 × 10−2 N.
(b) After doubling the charge, charge on sphere A, qA = Charge on sphere B, qB = 2 × 6.5 × 10−7 C = 1.3 × 10−6 C
The distance between the spheres is halved.
Q1 = 2 x q
Q2 = 2 x q
R = 0.5 x r
Force of repulsion between the two spheres,
Using coulomb’s law, we get,
= 16 × 1.52 × 10−2
= 0.243 N
Therefore, the force between the two spheres is 0.243 N.
Question1.13
Suppose the spheres A and B in Exercise 1.12 have identical sizes. A third sphere of the same size but uncharged is brought in contact with the first, then brought in contact with the second, and finally removed from both. What is the new force of repulsion between A and B?
Answer:
Note: If a conducting uncharged material is brought in contact with a charged surface then the charges are shared uniformly between the two bodies.
Given: Charge on sphere 1, q1 = 6.5× 10-7 C
Charge on sphere 2, q2 = 6.5× 10-7 C
Charge on sphere 3, q3 = 0
Step 1: The uncharged sphere is brought in contact with sphere 1. Since sphere 1 has charge ‘q’, it gets distributed among sphere 1 and sphere 3.
Now, charge on sphere 1 = q/2
Charge on sphere 2 = q/2
At this point the sphere 3 which was initially uncharged has a charge “q/2”.
Step 2: Now sphere 3 is brought in contact with sphere 2 due to which 1/4 × q will flow from sphere 2 to sphere 3. Now sphere 2 and sphere 3 have “3/4 × q” charge.
Now, q1 = ½ × 6.5 × 10-7 C
⇒ 3.25× 10-7 C
q2 = ¾ × 6.5× 10-7 C
⇒ 4.87 × 10-7 C
q3 = ¾ × 6.5× 10-7 C
⇒ 4.87 × 10-7 C
Question1.14
Figure 1.33 shows tracks of three charged particles in a uniform electrostatic field. Give the signs of the three charges. Which particle has the highest charge to mass ratio?
Answer:
Opposite charges attract each other and same charges repel each other. It can be observed that particles 1 and 2 both move towards the positively charged plate and repel away from the negatively charged plate. Hence, these two particles are negatively charged. It can also be observed that particle 3 moves towards the negatively charged plate and repels away from the positively charged plate. Hence, particle 3 is positively charged.
The charge to mass ratio (emf) is directly proportional to the displacement or amount of deflection for a given velocity. Since the deflection of particle 3 is the maximum, it has the highest charge to mass ratio.
Question1.15
Consider a uniform electric field E = 3 × 103 îN/C. (a) What is the flux of this field through a square of 10 cm on a side whose plane is parallel to the yz plane? (b) What is the flux through the same square if the normal to its plane makes a 60° angle with the x-axis?
Answer:
Given:
Electric field E = 3× 103 N/CSide of squa
re, s = 10 cm
a) Flux of field through square whose plane is parallel to yz plane.
We understand that the normal to the plane is parallel to the direction of field.
So, θ = 0°
Ø = E . A
Ø = E × A× cos(θ) …(1)
Where, E = Electric field
A = Area through which we have to calculate flux
θ = Angle between normal to surface and the Electric field
A = s2
A = .01 m2
Plugging values, of E, A and θ in equation (1)
Ø = 3× 103 NC-1× 0.01m2× cos0°
Ø = 30 Nm2C-1
b) If normal to its (square’s) plane makes 60° with the X axis.
θ = 60°
Ø = E × A× cos(θ)
Ø = 3× 103 NC-1× 0.01m2 × cos60°
Ø = 15 Nm2C-1
Question1.16
What is the net flux of the uniform electric field of Exercise 1.15 through a cube of side 20 cm oriented so that its faces are parallel to the coordinate planes?
Answer:
All the faces of a cube are parallel to the coordinate axes. Therefore, the number of field lines entering the cube is equal to the number of field lines piercing out of the cube. As a result, net flux through the cube is zero.
Question1.17
Careful measurement of the electric field at the surface of a black box indicates that the net outward flux through the surface of the box is 8.0 × 103 N m2/C. (a) What is the net charge inside the box? (b) If the net outward flux through the surface of the box were zero, could you conclude that there were no charges inside the box? Why or Why not?
Answer:
Given:
a) Ø = 8.0× 103 Nm2C-1
Let net charge inside the box = q
We know that,
Flux, Ø = q/ε0 ..(1)
Where, q = net charged enclosed
ε0 = permittivity of free space
ε0 = 8.85× 10-12 N-1 m-2C2
Plugging values of Ø and ε0 in equation (1) we get,
q = Ø × ε0
⇒ q = 8.0 × 103 Nm2C-1× 8.85× 10-12N-1C2m-2
⇒ q = 7.08 × 10-8 C
Hence, the net charge inside the box is 0.07 µC.
(b) No, we cannot conclude that the body doesn’t have any charge. The flux is due to the Net charge of the body. There may still be equal amount of positive and negative charges. So, it is not necessary that if flux is zero then there will be no charges.
Question1.18
A point charge +10 μC is a distance 5 cm directly above the centre of a square of side 10 cm, as shown in Fig. 1.34. What is the magnitude of the electric flux through the square? (Hint: Think of the square as one face of a cube with edge 10 cm.)
Answer:
Given:q = + 10
s = 10 cm
Assume the charge to be enclosed by a cube, where the square is one of its sides.
Now, let us find the total flux through the imaginary cube.
We know that,
Flux, Ø = q/ε …(1)
Where, q = net charged enclosed
ε0 = permittivity of free space
ε0 = 8.85× 10-12 N-1 m-2C2
Now plugging the values of q and ε0 in equation (2)
Ø = 10-6C/8.85 x 10-12N-1m2C2
⇒ Ø = 11.28 × 105 Nm-2C-1
We understand that flux through all the faces of cube will be equal;
Let flux through the square = Øa
Hence,
Øa = Ø/6
Explanation: The net flux will be distributed equally among all 6 faces of the cube. Hence, the square will have one sixth of the total flux.
Øa = 1.88 Nm-2C-1
Question1.19
A point charge of 2.0 μC is at the centre of a cubic Gaussian surface 9.0 cm on edge. What is the net electric flux through the surface?
Answer:
Question1.20
A point charge causes an electric flux of −1.0 × 103 Nm2/C to pass through a spherical Gaussian surface of 10.0 cm radius centered on the charge. (a) If the radius of the Gaussian surface were doubled, how much flux would pass through the surface? (b) What is the value of the point charge?
Answer:
Given:
Ø = -1.0× 103 Nm2C-1
r1 = 10.0 cm.
a) Flux if the radius of the Gaussian surface is doubled.
If the radius is doubled then the flux would remain same i.e. -1.0× 103 Nm2C-1.
The geometry of the Gaussian surface doesn’t affect the total flux through it. The net charge enclosed by Gaussian surface determines the net flux.
b) Let value of point charge enclosed by Gaussian surface = q
We know that,
Flux, Ø = q/ε0 …(1)
Where, q = net charged enclosed
ε0 = permittivity of free space
ε0 = 8.85× 10-12 N-1 m-2C2
Now plugging, the values Ø and ε0 in equation (1).
q = Ø× ε0
⇒ q = -1.0× 103Nm2C-1 × 8.85× 10-12N-1m-2C2
⇒ q = -8.85 × 10-9 C
The charge enclosed by the surface is -8.85 × 10-9 C.
Question1.21
A conducting sphere of radius 10 cm has an unknown charge. If the electric field 20 cm from the centre of the sphere is 1.5 × 103 N/C and points radially inward, what is the net charge on the sphere?
Answer:
Given:
Radius of charged sphere, r = 10 cm
Electric field, 20 cm away from centre of sphere, E = 1.5× 103 NC-1
We know that, electric field intensity at a point P, located at a distance R, due to net charge q is given by,
Now plugging the values of q and R in equation (1)
q = 4× π× ε0× R2× E
⇒ q = 4× 3.14× 8.85× 10-12N-1m-2C-2× (0.2m)2 × 1.5× 103C
⇒ q = 6.67× 10-9C
The net charge on the sphere is -6.67× 10-9C. Since the electric field points radially inwards, we can infer that charges on sphere are negative.
Question1.22
A uniformly charged conducting sphere of 2.4 m diameter has a surface charge density of 80.0 μC/m2. (a) Find the charge on the sphere. (b) What is the total electric flux leaving the surface of the sphere?
Answer:
Given: radius of sphere, r = 1.2 m
Surface charge density, σ = 80.0 μC/m2
a) Let charge on sphere = q
We understand that,
Total charge, Q = Surface charge density× surface area.
Surface area of sphere, S = 4πr2
S = 18.08 m2
Q = 80× 10-6Cm-2× 18.08m-2
⇒ Q = 1.447 × 10-3C
b) Let total electric flux leaving the surface of sphere
We know that,
Flux, Ø = q/ε0 …(1)
Where, Q = net charged.
ε0 = permittivity of free space
ε0 = 8.85× 10-12 N-1 m-2C2
By, plugging the values of q and ε0 in equation (1), we get,(b)
Ø = 1.63 x 108 Nm2C-1
The total flux through the sphere is 1.63 x 108 Nm 2C-1
Question1.23
An infinite line charge produces a field of 9 × 104 N/C at a distance of 2 cm. Calculate the linear charge density.
Answer:
Given:
E = 9× 104 NC-1
d = 2 cm
Let the linear charge density = λ Coulomb/metre
We know that, Electric field produced by a line charge with a linear charge density σ, at a distance d is given by,
Where, λ = linear charge density.
ε0 = permittivity of free space
ε0 = 8.85× 10-12 N-1 m-2C2
d = distance
From equation (1) we have,
⇒ λ = E× 2× π× ε0× d
⇒ λ = 9× 104 NC-1× 2× π×8.85× 10-12 N-1 m-2C2× 0.02m
⇒ λ = 10 µ Cm-1
The linear charge density is 10 µ Cm-1.
Question1.24
Two large, thin metal plates are parallel and close to each other. On their inner faces, the plates have surface charge densities of opposite signs and of magnitude 17.0 × 10−22 C/m2. What is E: (a) in the outer region of the first plate, (b) in the outer region of the second plate, and (c) between the plates?
Answer:
The situation is represented in the following figure.
Let electric field in region 1 = E1
Region 2 = E2
Region 3 = E3
The electric field in region I and region III is zero because no charge is present in these regions.
E1 = 0
E2 = 0
We know that,
E3 = σ/ε0 …(1)
Where, σ Surface charge density
ε0 = permittivity of free space
ε0 = 8.85× 10-12 N-1 m-2C2
Now, plugging the Values in equation (1).
⇒ E3 = 1.92 × 10-10 NC-1
The electric field in the region enclosed by the plates is found to be 1.92 × 10-10 NC-1.
The electric field in region III is 1.92 × 10-10 NC-1.
Question1.25
An oil drop of 12 excess electrons is held stationary under a constant electric field of 2.55 × 104 N C−1 in Millikan’s oil drop experiment. The density of the oil is 1.26 g cm−3. Estimate the radius of the drop. (g = 9.81 m s−2; e = 1.60 × 10−19 C).
Answer:
Excess electrons on an oil drop, n = 12
Electric field intensity, E = 2.55 × 104 NC−1
Density of oil, ρ = 1.26 gm/cm3 = 1.26 × 103 kg/m3
Acceleration due to gravity, g = 9.81 ms−2
Charge on an electron, e = 1.6 × 10−19 C
Radius of the oil drop = r
Force (F) due to electric field E is equal to the weight of the oil drop (W)
F = W
Eq = mg
= 9.82 × 10−4 mm
Therefore, the radius of the oil drop is 9.82 × 10−4 mm.
Question1.26
Which among the curves shown in Fig. 1.35 cannot possibly represent electrostatic field lines?
Answer:
(a) The field lines showed in (a) do not represent electrostatic field lines because field lines must be normal to the surface of the conductor.
(b) The field lines showed in (b) do not represent electrostatic field lines because the field lines cannot emerge from a negative charge and cannot terminate at a positive charge.
(c) The field lines showed in (c) represent electrostatic field lines. This is because the field lines emerge from the positive charges and repel each other.
(d) The field lines showed in (d) do not represent electrostatic field lines because the field lines should not intersect each other.
(e) The field lines showed in (e) do not represent electrostatic field lines because closed loops are not formed in the area between the field lines.
Question1.27
In a certain region of space, electric field is along the z-direction throughout. The magnitude of electric field is, however, not constant but increases uniformly along
the positive z-direction, at the rate of 105 NC−1 per metre. What are the force and torque experienced by a system having a total dipole moment equal to 10−7 Cm in the negative z-direction?
Answer:
Dipole moment of the system, p = q × dl = −10−7 C m
Rate of increase of electric field per unit length,
= −10−7 × 10−5
= −10−2 N
The force is −10−2 N in the negative z-direction i.e., opposite to the direction of electric field. Hence, the angle between electric field and dipole moment is 180°.
Torque (τ) is given by the relation,
τ = pE sin180° = 0
Therefore, the torque experienced by the system is zero.
Question1.28
(a) A conductor A with a cavity as shown in Fig. 1.36(a) is given a charge Q. Show that the entire charge must appear on the outer surface of the conductor. (b) Another conductor B with charge q is inserted into the cavity keeping B insulated from A. Show that the total charge on the outside surface of A is Q + q [Fig. 1.36(b)]. (c) A sensitive instrument is to be shielded from the strong electrostatic fields in its environment. Suggest a possible way.
Answer:
(a) Let us consider a Gaussian surface that is lying wholly within a conductor and enclosing the cavity. The electric field intensity E inside the charged conductor is zero.
Let q is the charge inside the conductor and ∈0 is the permittivity of free space.
According to Gauss’s law,
Therefore, charge inside the conductor is zero.
The entire charge Q appears on the outer surface of the conductor.
(b) The outer surface of conductor A has a charge of amount Q. Another conductor B having charge +q is kept inside conductor A and it is insulated from A. Hence, a
charge of amount −q will be induced in the inner surface of conductor A and +q is induced on the outer surface of conductor A. Therefore, total charge on the outer surface of conductor A is Q + q.
(c) A sensitive instrument can be shielded from the strong electrostatic field in its environment by enclosing it fully inside a metallic surface. A closed metallic body acts as an electrostatic shield.
Question1.29
A hollow charged conductor has a tiny hole cut into its surface. Show that the electric field in the hole is , (σ / 2∈0) ñ where ñ is the unit vector in the outward normal direction, and σ is the surface charge density near the hole.
Answer:
Let us consider a conductor with a cavity or a hole. Electric field inside the cavity is zero.
Let E is the electric field just outside the conductor, q is the electric charge, σ is the charge density, and ∈0 is the permittivity of free space.
Question1.30
Obtain the formula for the electric field due to a long thin wire of uniform linear charge density λ without using Gauss’s law. [Hint: Use Coulomb’s law directly and evaluate the necessary integral.]
Answer:
Take a long thin wire XY (as shown in the figure) of uniform linear charge density λ
On differentiating equation (2), we obtain
Question1.31
It is now believed that protons and neutrons (which constitute nuclei of ordinary matter) are themselves built out of more elementary units called quarks. A proton and a neutron consist of three quarks each. Two types of quarks, the so called ‘up’ quark (denoted by u) of charge (+2/3) e, and the ‘down’ quark (denoted by d) of charge (−1/3) e, together with electrons build up ordinary matter. (Quarks of other types have also been found which give rise to different unusual varieties of matter.) Suggest a possible quark composition of a proton and neutron.
Answer:
A proton has three quarks. Let there be n up quarks in a proton, each having a
Question1.32
(a) Consider an arbitrary electrostatic field configuration. A small test charge is placed at a null point (i.e., where E = 0) of the configuration. Show that the equilibrium of the test charge is necessarily unstable.
(b) Verify this result for the simple configuration of two charges of the same magnitude and sign placed a certain distance apart.
Answer:
(a) Let the equilibrium of the test charge be stable. If a test charge is in equilibrium and displaced from its position in any direction, then it experiences a restoring force towards a null point, where the electric field is zero. All the field lines near the null point are directed inwards towards the null point. There is a net inward flux of electric field through a closed surface around the null point. According to Gauss’s law, the flux of electric field through a surface, which is not enclosing any charge, is zero. Hence, the equilibrium of the test charge can be stable.
(b) Two charges of same magnitude and same sign are placed at a certain distance. The mid-point of the joining line of the charges is the null point. When a test charged is displaced along the line, it experiences a restoring force. If it is displaced normal to the joining line, then the net force takes it away from the null point. Hence, the charge is unstable because stability of equilibrium requires restoring force in all directions.
Question1.33
A particle of mass m and charge (−q) enters the region between the two charged plates initially moving along x-axis with speed vx (like particle 1 in Fig. 1.33). The length of plate is L and an uniform electric field E is maintained between the plates. Show that the vertical deflection of the particle at the far edge of the plate is qEL2/ (2mVx2).
Compare this motion with motion of a projectile in gravitational field discussed in Section 4.10 of Class XI Textbook of Physics.
Answer:
Charge on a particle of mass m = − q
Velocity of the particle = vx
Length of the plates = L
Magnitude of the uniform electric field between the plates = E
Mechanical force, F = Mass (m) × Acceleration (a)
a = F/m
However electric force F = qF
Question1.34
Suppose that the particle in Exercise in 1.33 is an electron projected with velocity vx = 2.0 × 106 m s−1. If E between the plates separated by 0.5 cm is 9.1 × 102 N/C, where will the electron strike the upper plate? (| e | =1.6 × 10−19 C, me = 9.1 × 10−31 kg.)
Answer:
Velocity of the particle, vx = 2.0 × 106 m/s
Separation of the two plates, d = 0.5 cm = 0.005 m
Electric field between the two plates, E = 9.1 × 102 N/C
Charge on an electron, q = 1.6 × 10−19 C
Mass of an electron, me = 9.1 × 10−31 kg
Let the electron strike the upper plate at the end of plate L, when deflection is s.
Therefore,
Therefore, the electron will strike the upper plate after travelling 1.6 cm.
Recommended For You:
NCERT Solutions Class 11 Physics Chapter 3 Motion in a Straight Line
NCERT Solutions Class 11 Physics Chapter 2 Units and Measurements